Preduct Details

Quality detection

Item Standard Typical Value Test Condition Test Instrument
Thickness(mm) 0.38±0.02 0.37-0.39 Online test, Manual measuring


SCANTEC Online Gauge, Dial Pipe Thickness Gauge
0.76±0.02 0.75-0.77
1.52±0.03 1.50-1.54
Shrinkage Rate 12% for 0.38 10-12% 60℃±20℃, 15min Blasting drying Oven
8% for 0.76 3-5%
5% for 1.52 1-3%
Roughness 15-45um   - 0.1粗糙度仪
Tensile Strength 20Mpa 20-25Mpa - LDS Electrical Tensile Testing Machine
Breakage Elongation 200% 250-400% - LDS Electrical Tensile Testing Machine
Moisture ≤0.6% 0.35-0.55 40℃±2℃, 3h Electronic Balance,Vacuum drying oven
Haze ≤0.6% 0.3-0.4% Laminated with 3mm float glass WGT-S Light Transmittance Haze Meter
Light Transmittance ≧85%  86-88% Laminated with 3mm float glass WGT-S Light Transmittance Haze Meter
2260g Ball Drop (Automotive) Not pass through within 5min after impact Not pass through ball drop from 4m height  
Pummel Test (Architectural) ≧6 7-9 -18℃±2℃,2h 75mmX300mm Laminated glass 500g Hammer
High Temperature resistance No bubbles within 15mm from original edge   300mmX300mm Laminated glass, 5h in Boiling Water Boiling Water

Note:data on basis of 0.76mm PVB

Regular Specification

0.38mm Clear:
800,900,1050,1150,1250,1350,1550,1850,2050,2140,2240,2440

0.76mm Clear:
800,900,1050,1150,1250,1350,1550,1850,2050,2140,2240,2440

1.52mm lear:
1550,1850,2050,2140,2240,2440,2500,2600,2700

0.76mm Clear with Green/Blue Shade

0.38mm Translucent/Opaque